Product > Closed-Cell > MD-C200v2

 

MD-C200v2

Download PDF
Request a Quote

Genyk MD-C-200v2 closed-cell spray foam insulation allows Canadian builders to push the limits of design while meeting or exceeding local building code requirements for residential construction. With one formulation for all seasons and cold climate application performance, MD-C-200v2 performs well in Canadian climates from coast to coast to coast.

Key Product Features
  • LTTR: 1.934 m2 K/W (R-11 @ 2”)
  • Conforms to CAN/ULC-S705.1
  • Acts as a vapour barrier; water vapour permeance is 56ng/Pa.s.m2 at 50 mm (0.98 Perms @ 2.0”)
  • Acts as an air barrier; air permeance is 0.0006 L/s.m2 @
  • 75 Pa for 50 mm thickness
  • Core density: 35.2 kg/m³ (2.2 lb/ft³)
  • Compressive strength of 259 kPa (38 PSI) allows for underslab and below-grade applications
  • Zero ozone depleting
  • Contains recycled content
  • Can reject bulk water
  • CCMC #13593-L
Performance Benefits
  • Conforms to CAN/ULC S705.1 and S705.2
  • Stable thermal performance.
  • LTTR 1.94 m2 K/W
  • Acts as a vapour barrier
  • Has a permeance of <56ng/Pa.s.m@ 50 mm (0.98 Perms @ 2.0”)
  • Rigid, not flexible composition contributes to wall racking strength.
  • Rejects bulk water
  • Supports indoor air quality by blocking air infiltration and mass transfer of moisture that may cause mould.
  • Allows architects to design to meet or exceed the ASHRAE 90.1 – 2007 Energy Standard for Buildings
Characteristics
  • Closed-cell structure
  • Synthetic blown (zero ozone depletion potential)
  • Medium density 2.0 lb. nominal
  • PBDE-free; blown with HFC 245fa
  • Rigid to touch
  • Expands 40 times from liquid state
  • Apply in lifts of 2″ (50 mm)
  • Low exothermic reaction temperature; will not harm coatings on electrical wiring, plumbing or other building components
  • Lowest global warming potential (GWP of 1020)
  • A low-emitting material (LEM) as per CHPS EQ 2.2 Section 01350 (Collaborative for High Performance Schools)
Construction Benefits
  • Yields of 4,500 board feet
  • Broad range of substrates, temperatures and humidity conditions
  • Superior cold temperature adhesion to multiple substrates
  • Dimensionally stable
  • 1 day occupancy
LEED Contributions

Genyk MD-C-200 meets prerequisites and may contribute towards these LEED for Homes points:

  • EAC1.1: Optimizing Energy Performance
  • EAC1.2: Optimizing Energy Performance
  • EAC2: Insulation
  • EAC3: Air Infiltration
  • MRC2: Environmentally Preferable Products
Applications
Limitations of Use

Should not be used:

  • Against substrates that may exceed 180°F at installation or in the future
  • Inside electrical outlets or junction boxes
  • Flotation purposes
  • Placed above the roofing membrane
  • Exterior surfaces, exposed and/or in contact with water
Fire Summary
  • Meets CAN/ULC S102 and CAN/ULC S127